Is Dryer Disassembling And Cleaning Important For Appliance Repair Service In Brantford?

A dryer consists of a large drum, a set of motors that work with pulleys and a series of belts. All of these turn the drum to dry your clothes that are put into it. The gas heater is responsible for heating the air. This hot air generated is blown inside the dryer's drum to dry the clothes. It is a simple mechanism seemingly, but there is lot more than that. There are a series of thermostats inside the dryer that regulates the temperature as well as the speed of the drum. These thermostats have timer device that control the working through the control panel of the dryer.

The Safety Aspect

Malfunctioning of anyone component will warrant for professional Appliance Repair service in Brantford to restore normal functionality. The process starts with the disassembling of the dryer. The safety device of the dryer is the door switch. This activates the working parts that are why a dryer does not work unless the door is properly closed no matter the settings is perfect on the control panel. In some instances, letting the dryer stay idle and cool for ten fifteen minutes and then pushing the reset button can run the motor one again provided there are no issues with the motor, switches or the electrical system. To be safe unplug it, disconnect the grounding wire and close the gas supply valve.

Disassembling The Dryer

Apart from the power cord and exhaust vent all other components of the dryer are inside a metal box. Though each of these components acts separately but all of these are interrelated. You will have to disassemble these components for tests and for Appliance Repair service in Brantford following the manufacturer instructions as different models may have different disassembling process though the basic process is the same. There may be some knobs to the shafts and setscrews. Unscrew to pull the knobs out and remove the back panel only. If the light burns out remove it carefully and replace it. For anything complicated than that call a professional.

Cleaning The Dryer

Dryers can accumulate a lot of lint that must be removed on a regular basis. These fine and fuzzy material can block dryer lint traps and clogs the vents as well as fills blowers. This lint can also accumulate around tracks of the rollers in the drum. You may also find lint under the pulleys as well as on the drive belt. This will result in poor drying or even no drying of clothes sometimes. To avoid such problems you must clean out the lint trap system of the dryer after every use to keep the cost of Appliance Repair service in Brantford low.

The Cleaning Process

If you want to clean the lint screen, you will first have to remove it from the dryer unit. This lint screen is usually located near or even under the door sill. It may be also on the top of the dryer and near its control panel. You simply have to pull it up and out of its housing to clean it with a soft brush and replace it once again. For more information visit here: Top Choice Appliance Repair